Miniature push-on connectors; 30% smaller than SMP
Bullet adaptors for board-to-board blind mate applications
Magnum RF® ganged, multi-port solutions (cable-to-board & board-to-board)
Low VSWR
Full detent, smooth bore or catcher's mitt for varying retention forces
Straight, right-angle and edge mount
.047, .086 and Samtec 23 AWG low-loss millimeter wave cable assemblies
Quickly and easily build RF cable assemblies using Samtec’s RF Cable Solutionator®.
High-frequency Precision RF interconnects to 65 GHz; single-port SMPM or multi-port ganged Magnum RF® solutions.
Features
Downloads & Resources
Literature
Technical Documents
Products
SMPM-SM
Features
Compensates for misalignment in X & Y directions
Miniature push-on connectors; 30% smaller than SMP
Bullet adaptors for board-to-board blind mate applications
Low VSWR
Full detent, smooth bore or catcher's mitt
SMPM-MT
Features
Miniature push-on connectors; 30% smaller than SMP
Bullet adaptors for board-to-board blind mate applications
Low VSWR
Full detent or smooth bore
SMPM-ST-TH
Features
Straight or right-angle plugs
Miniature push-on connectors; 30% smaller than SMP
Bullet adaptors for board-to-board blind mate applications
Low VSWR
Full detent, smooth bore or catcher's mitt
SMPM-RA-TH
Features
Miniature push-on connectors; 30% smaller than SMP
Bullet adaptors for board-to-board blind mate applications
Low VSWR
Full detent or smooth bore
Right-angle plugs
SMPM-EM
Features
Miniature push-on connectors; 30% smaller than SMP
Low VSWR
Full detent, smooth bore or catcher's mitt for varying retention forces
Straight, edge mount plugs
SMPMT
Features
Miniature threaded connectors; 30% smaller than SMP
SMPM MIL-STD-348 interface with retractable threaded coupling nut
Threading provides a secure, robust connection for excellent electrical and mechanical performance
Mixed technology termination
Low VSWR
Full detent or smooth bore
Intermateable with most threaded SMPM connectors in the market
In development: threaded SMPM cable connector on Samtec's RF047-A cable assembly
PRFM0
Features
SMPM precision RF cable connectors
Available for .047 and .086 low-loss microwave cable assemblies
Contact Samtec's RF Group for more information.
Prints available
Quickly and easily build RF cable assemblies using Samtec’s RF Cable Solutionator®.
PRFIA
Features
In-series precision RF adaptors
Applications: precision measurement or SMPM adaptors for high-density blind-mate applications
SMPM spring-loaded adaptors provide higher vibration tolerance for maintaining consistent signal contact
Straight orientation, 50 Ohm impedance
SMPM, 1.85 mm, 2.40 mm or 2.92 mm
GPPC-CMM
Features
Solderless compression mount, two-port SMPM style interface for diff pair testing
High-density, space-saving designs
Push-on interface for quick installation
Alignment features: with the addition of fiducials on the PCB any visual misalignment is eliminated, ensuring peak connector performance
Single Row
Pitch: 3.56 mm (.140")
Custom pitch or multi-row designs, contact RFGroup@samtec.com
Board thickness: 0.016" to 0.125"
Torque (board mount): 0.9 ~ 1.3 in-lbs
Bullet adaptors allow for axial and radial misalignment, and blind mate
Board-to-board applications: mezzanine or perpendicular
GPPC-RA-SM
Features
Right-angle, extremely low profile - 3.94 mm (.155") body height
Belly-to-belly, surface mount PCB connection for maximum density
High-density, space-saving designs
Push-on interface for quick installation
Single Row
Pitch: 3.56 mm (.140")
Custom pitch or multi-row designs, contact RFGroup@samtec.com
Bullet adaptors allow for axial and radial misalignment, and blind mate
Board-to-board applications: coplanar or perpendicular
GPPC-EM
Features
Edge mount board termination
High-density, space-saving designs
Push-on interface for quick installation
Single Row
Pitch: 3.56 mm (.140")
Custom pitch or multi-row designs, contact RFGroup@samtec.com
Bullet adaptors allow for axial and radial misalignment, and blind mate
Board-to-board applications: coplanar or perpendicular
GPPC-ST-SL
Features
Vertical, standard surface mount with a stub launch contact
High-density, space-saving designs
Push-on interface for quick installation
Single Row
Pitch: 3.56 mm (.140")
Custom pitch or multi-row designs, contact RFGroup@samtec.com
Bullet adaptors allow for axial and radial misalignment, and blind mate
Board-to-board applications: mezzanine or perpendicular
GPPB
Features
Single Row
Push-on interface with varying retention forces
Pitch: 3.56 mm (.140")
High-density, space-saving design
Custom pitch or multi-row designs, contact RFGroup@samtec.com
Bullet adaptors allow for axial and radial misalignment, and blind mate
Surface mount with swept contact (-SM option)
Board-to-board applications: mezzanine or perpendicular
Contact Sales
More RF Connectors
- 1.00 mm Precision RF, 50 Ohm
- 1.35 mm Precision RF, 50 Ohm
- 1.85 mm Precision RF, 50 Ohm
- 2.40 mm Precision RF, 50 Ohm
- 2.92 mm Precision RF, 50 Ohm
- 3.50 mm Precision RF, 50 Ohm
- SSMA Precision RF, 50 Ohm
- SMA 50 Ohm
- SMPM Precision RF, 50 Ohm
- Threaded SMPM Precision RF, 50 Ohm
- SMP Precision RF, 50 Ohm
- TNCA Precision RF, 50 Ohm
- N Type Precision RF, 50 Ohm
- BNC 75 & 50 Ohm
- DIN 1.0/2.3 75 Ohm
- HD-BNC 75 Ohm
- MCX 50 & 75 Ohm
- MMCX 50 & 75 Ohm
- SMB 50 & 75 Ohm
- TNC 50 Ohm
- In-Series Adaptors, Precision RF, 50 Ohm
- Between-Series Adaptors, Precision RF, 50 Ohm
- Magnum RF®
- Flexible Waveguide
- Ganged Micro Scale
- Shielded Twisted Pair Cable System
- IsoRate®
- Rugged, Blind Mate Modular Solutions to 110 GHz