PC/104-Plus™ is a specification that was accepted in 1997 by the PC/104™ Consortium (now the RMS Consortium) and establishes a standard for embedded applications with the use of a high speed PCI bus.
PC/104-Plus™ specifies a 120 pin, 2 mm stackable connector to allow for the additional signals of the 32-bit PCI bus. Like the PC104 extends upon the PC bus, the PC/104-Plus™ is an extension of the PC104 with all of the same benefits, plus more.
It was also necessary that the PC104 connectors be capable of being stackable and usable along with standard PC104 modules (in the same stack). This allows the new PC/104-Plus™ module to be used in preexisting PC104 “legacy” modules, thus expanding its area of use.
Connectors
PC/104-Plus™ - FleXYZ™ (ESQT)
Samtec’s ESQT Product is compliant to the PC/104-Plus™ standard. The PC/104-Plus™ standard specifies a 30 x 4 configuration, and the Samtec PC/104-Plus™ part numbers are below (a press fit version as well as a shroud is also available):
Your information has been received and is currently being processed. You will receive an acknowledgement via e-mail confirming additional details once your request has been processed.
If you have any questions please feel free to contact our Customer Service.
Samtec Disclaimer Notice
Samtec makes no warranty or guarantee as to the suitability of its products or models for any specific application. Samtec reserves the right to make changes at any time without further notice. Models were developed using nominal values for physical dimensions and material properties and specific grounding and boundary conditions. Actual in-circuit performance can vary significantly from simulated results. All parameters should be validated by the customer”s own technical experts. By downloading a model, the user agrees to absolve Samtec from all liability related to the use or application of the model or product. The models herein are for the limited purpose of considering the purchase/use of product(s) of Samtec, Inc. (“Samtec”) and contain proprietary information of Samtec, our various licensors, or both. Samtec does not grant express or implied rights or license under any patent, copyright, trademark or other proprietary rights and the use of the models for building, reverse engineering or replication is strictly prohibited. By using these models, the user agrees to not infringe, directly or indirectly, upon any intellectual property rights of Samtec and acknowledges that Samtec, our various licensors, or both own all intellectual property therein. The models are presented “AS IS”. While Samtec makes every effort to present excellent information, it does not warrant the models are without error or defect or the use of the models in terms of accuracy, reliability or otherwise. The user agrees that all access and use of the models is at its own risk. NO WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY KIND WHATSOEVER ARE PROVIDED.
Click “I Accept” to accept the terms & conditions:
