Panel Mount Wire to Board Cables and Assembly Connector Terminal Housings

28 or 30 AWG PVC wire with color-coded option available

End 2 options

Four points of contact for an extremely reliable connection

Hyper Claw™ hyperboloid-type contact for extreme high mating cycles

Micro 1.00 mm (.0394") pitch

Double row design, up to 40 positions per row

Four points of contact for an extremely reliable connection

Hyper Claw™ hyperboloid-type contact for extreme high mating cycles

Micro 1.00 mm (.0394") pitch

Double row design, up to 40 positions per row

28 or 30 AWG Teflon™ fluoropolymer wire

End 2 options

Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Samtec

For use with IPP1 cable terminal housing and TC145 Hyper Claw™ crimp terminal

Captive screw holes for cable-to-cable and cable-to-board applications

Features the ultra rugged benefits of URSA® I/O with the integration of Precision RF to 40 GHz

Micro-miniature, push-on SMPM style contacts

50 ohm, .047” RF millimeter wave cable (RF047-A)

EMI shielding to limit signal degradation and optimize performance

2, 4 or 6 positions

RF047-A end 2 options: 1.00 mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, SMA, SMP, SMPM and Threaded SMPM (SMPMT). Ganged SMPM (Magnum RF®) and U.FL/MHF® 1. Visit the next page to build your solution.

Cable-to-cable solution

Strain relief

Choice of single ended, double ended or transfer end

Fits .033” (0.84 mm), .062” (1.57 mm) and .090” (2.29 mm) thick panels

3 – 10 positions

28 or 30 AWG wire

Choice of single ended, double ended or transfer end

Fits .033” (0.84 mm), .062” (1.57 mm) and .090” (2.29 mm) thick panels

3 – 10 positions

28 or 30 AWG Teflon™ fluoropolymer cable

Choice of single ended, double ended or transfer end

Fits .033” (0.84 mm), .062” (1.57 mm) and .090” (2.29 mm) thick panels

28 or 30 AWG wire

2 – 10 positions per row

Choice of single ended, double ended or transfer end

Fits .033” (0.84 mm), .062” (1.57 mm) and .090” (2.29 mm) thick panels

28 or 30 AWG Teflon™ fluoropolymer cable

2 – 10 positions per row

Fits .033” (0.84 mm), .062” (1.57 mm) and .090” (2.29 mm) thick panels

1.00 mm (.0394") pitch

Semi-auto assembly tooling available

Hand tool available

2 – 10 positions

Polarized, double row system to 30 pins

20 to 28 AWG PVC wire

Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Samtec

Polarized, double row system to 30 pins

20 to 28 AWG Teflon™ fluoropolymer cable

Polarized, double row system

Cable-to-cable assembly solution; mates with UMPE

Simplifies board layout and delivers power directly to active components

2–10 power blades on a 2.00 mm pitch

Rugged metal or plastic latching

16 or 18 AWG cable; 18 AWG color coded available

Single ended or double ended cable assemblies

Components for self assembly: IMPC, IMPCC, CC489

Cable-to-cable assembly solution; mates with UMPET

Simplifies board layout and delivers power directly to active components

Teflon™ fluoropolymer wire available for high temp or halogen free applications

2–10 power blades on a 2.00 mm pitch

Rugged metal or plastic latching

16 or 18 AWG cable; 18 AWG color coded available

Single ended or double ended cable assemblies

Components for self assembly: IMPC, IMPCC, CC489

Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Samtec

2–10 power blades on a 2.00 mm pitch

Latching options: metal, plastic or panel mount

Requires IMPCC for use

Automotive A-Series product available

Cable-to-cable bulkhead panel connection using Flyover® cable technology

Up to 4,096 Gbps PAM4 aggregate data rate

128 Gbps PAM4 performance in 16 and 32 pair configurations

PCI Express® 7.0 solution in x4 and x8 pair configurations

Rugged external shielding for EMI protection

Internal, inside the box cable

34 AWG twinax cable; 34 AWG coax (single-ended signaling available)

Samtec's NovaRay® I/O high data rate cable system in a rugged 38999 shell

Salt fog resistant to 48 hours

IP67 for dust and waterproof sealing option

High-density 16 pair; 32 on roadmap

Threaded cable-to-panel design using Flyover® cable technology

28 or 34 AWG (external); 34 AWG (internal) ultra low skew twinax

128 Gbps PAM4 per channel

PCIe® 7.0 capable

Up to 4,096 Gbps PAM4 aggregate data rate from the IC package to the panel and beyond

End 2 options include AcceleRate® and NovaRay® connectors

Alignment indicator

Dust cap available

Meets IP67 requirements for dust & water

Push-pull latching system

Standard 28 AWG wire

Alignment indicator

Dust cap available

Meets IP67 requirements for dust & water

Push-pull latching system

0.50 mm or 1.00 mm diameter pins available

Dust caps DCA-ACR-12-X-X

Field application kits available

Four keying options

Metal or plastic shell

Standard 24 or 28 AWG wires

Up to 5.0A

0.50 mm, 1.00 mm and 1.50 mm diameter pins available

Dust caps DCA-ACR-16-X-X

Field application kits available

Four keying options

Metal or plastic shell

RF lines available

Standard 16, 20, 24, or 28 AWG wires

Up to 11.6A

1.00 mm or 1.50 mm diameter pins available

Dust caps DCA-ACR-22-X-X

Field application kits available

Four keying options

Metal or plastic shell

RF lines available

Standard 16 or 24 AWG wires

Up to 8.3A

0.50 mm or 1.00 mm diameter pins available

Accepts 20–30 AWG wires

Dust caps DCA-ACR-12-X-X

Insertion tool available

Metal or plastic shell

PCB tail option available

Up to 5.0A

0.50 mm, 1.00 mm and 1.50 mm diameter pins available

Accepts 14–30 AWG wires

Dust caps DCA-ACR-16-X-X

Insertion tool available

Metal or plastic shell

PCB tail option available

RF lines available

Up to 11.6A

1.00 mm or 1.50 mm diameter pins available

Accepts 14–24 AWG wires

Dust caps DCA-ACR-22-X-X

Insertion tool available

Metal or plastic shell

PCB tail option available

RF lines available

Up to 8.3A

Available in one or two port configurations

Dust cap DCA-RPBE-01-01-P

Ethernet Cat5e

Panel Hardware Included

Right-angle orientation

Double ended or blunt cut

Dust cap DCA-RPBE-01-01-P

Ethernet Cat5e

Panel Hardware Included

Rugged overmold construction

Dust cap DCA-RPBU-XX-01-X

Panel Hardware Included

Right-angle or vertical orientations

Single and dual port available

USB A & B

Double ended or blunt cut

Dust cap DCA-RPBU-01-01-X

Panel Hardware Included

Rugged overmold construction

USB A & B

Rugged die cast panel mount design

Low profile right-angle

Supplied with panel mount hardware

Available in 19 positions

Dust cap available

Double ended or blunt cut

Rugged threaded interface

USB Type-C

Capable of USB 3.2 Gen 2x1 (10 Gbit/s)

IP67 sealed system

Panel mount

Plastic shell

Supports 100 W power delivery (5 A @ 20 V)

Rugged threaded interface

USB Type-C

Capable of USB 3.2 Gen 2x1 (10 Gbit/s)

IP67 sealed system

Panel mount

Plastic shell

Dust cap DCA-BRU-C-01

Supports 100 W power delivery (5 A @ 20 V)

Ethernet Cat 5e panel mount assembly

Panel thickness from 0.80 mm (.0315") to 5.20 mm (.205")

Termination for standard ethernet cable

Double ended or blunt cut

Dust cap DCA-17-01

Ethernet Cat5e

Panel Plug SCPPA-17-01

Rugged overmold construction

Panel thickness from 0.80 mm (.0315") to 5.20 mm (.205")

Termination for USB cable

USB panel mount assembly

Dust caps DCA-XX-01

Flash Drive Cover DCA-17-03

Panel Plug SCPPA-XX-01

Rugged overmold construction

Rugged threaded interface

USB A, B, & Mini B