mPOWER® connector system is the ultimate micro, high-power solution with incredible design flexibility in one product family for board-to-board, cable-to-board and cable-to-cable applications. Due to the wide variety of stack heights available, mPOWER® can be easily added to new or existing architectures. Discrete wire cable assemblies simplify board layout and deliver power directly to active components in the system.
With up to 18 Amps per blade (460 VAC/651 VDC max voltage rating) in an extremely small form factor, board space is saved without compromising power output.
Teflon™ fluoropolymer wire available for high temp or halogen free applications
2–10 power blades on a 2.00 mm pitch
Rugged metal or plastic latching
Single ended or double ended cable assemblies
Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Samtec
2–10 power blades on a 2.00 mm pitch
Latching options: metal, plastic or panel mount
Requires IMPCC for use
2 – 10 positions
Required for use with IMPC
Various plating options
Reeled contacts
Cable-to-cable assembly solution; mates with UMPE
Simplifies board layout and delivers power directly to active components
2–10 power blades on a 2.00 mm pitch
Rugged metal or plastic latching
16 or 18 AWG cable; 18 AWG color coded available
Single ended or double ended cable assemblies
Cable-to-cable assembly solution; mates with UMPET
Simplifies board layout and delivers power directly to active components
Teflon™ fluoropolymer wire available for high temp or halogen free applications
2–10 power blades on a 2.00 mm pitch
Rugged metal or plastic latching
16 or 18 AWG cable; 18 AWG color coded available
Single ended or double ended cable assemblies
Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Samtec
Cable-to-cable assembly solution; mates with UMPI
Simplifies board layout and delivers power directly to active components
2–10 power blades on a 2.00 mm pitch
Rugged metal or plastic latching
16 or 18 AWG cable; 18 AWG color coded available
Single ended or double ended cable assemblies
Cable-to-cable assembly solution; mates with UMPIT
Simplifies board layout and delivers power directly to active components
Teflon™ fluoropolymer wire available for high temp or halogen free applications
2–10 power blades on a 2.00 mm pitch
Rugged metal or plastic latching
16 or 18 AWG cable; 18 AWG color coded available
Single ended or double ended cable assemblies
Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Samtec
2–10 power blades on a 2.00 mm pitch
Rugged metal latching system
Requires IMPEC for use
2 – 10 positions
Required for use with IMPE
Various plating options
Reeled contacts
Up to 18 A per power blade
2–10 power blades on a 2.00 mm pitch
SET Qualified Product: visit samtec.com/SET for more information about Severe Environment Testing
5 mm to 16 mm, 18 mm & 20 mm stack heights
Up to 18 A per power blade
2–10 power blades on a 2.00 mm pitch
SET Qualified Product: visit samtec.com/SET for more information about Severe Environment Testing
5 mm to 16 mm, 18 mm & 20 mm stack heights
Allows for 0.035" of initial misalignment; alignment starts before connectors engage
Assists with “blind mate” for ultra micro, fine pitch mezzanine connectors
4 mm - 30 mm stack heights
MIL-DTL stainless steel
Pairs well with NVAM/NVAF, APM6/APF6, ADM6/ADF6 and UMPT/UMPS
